Leaderboard

You mention 'fast position and chord changes'. My single piece of advice would be to solve this issue by doing things slowly. Slow is the new fast. Slow is the fastest way to do fast. Whatever it is you're wanting to do, do it slowly, preferably with a metronome, or whatever you use for tempo, but set it to slow. Do whatever it is you are wanting to do, slowly, for a while (two, three weeks..? Every day, for ten-fifteen minutes..? Slowly..!). Once it can be done, slowly, well, up the tempo a little. No, just a little (60 bpm becomes 65 bpm, for example...) do this, regularly, for another 'while', and once you've become proficient at it, up the tempo a tad more (65 becomes 70..?). Repeat; if, after a 'while' it's still not smooth, clean, easy, go back down a tad with the tempo and repeat. It is useful, and recommended, to start from the original 'slow' tempo now and again, for a day or so, working back up to one's current tempo, as a refresher. Always with the metronome, or whatever you use for tempo. This is the way to obtain whatever speed one wants, and is the guaranteed fastest way. Is there a downside..? Yes, it requires a large bucketful of Patience. Those without this essential accessory will not achieve their goal, so be sure to have that bucket, and keep it well topped up. It is of no advantage to do this for hours on end, nor too many times a day, but if time permits, a couple or three sessions of 10-15 minutes (no more...) may be permitted. The key is in the regularity (every day...), in the keeping the tempo slow (hence the metronome or equivalent...) and the Patience. It cannot, and never does, fail. Douglas

I don't think I've posted here before - I'm a member of basschat.co.uk, but after playing bass for decades, lately I've been singing and playing mandolin and octave mandolin. I don't actually play guitar, though I have a couple of guitar-shaped objects in my collection - an acoustic guitar bodied octave mandolin, and earlier this year a local guitar builder converted a copy of a Gibson SG to mandolin for me. I'm currently working towards a Rock School grade 2 acoustic guitar exam... with a mandolin!

Six months ago I bought my Hohner acoustic guitar when I decided it was about time I started to play again, I then purchased an Epiphone Gibson Les Paul Studio 2. This week my wife brought home an acoustic classical guitar that was going to be sent to the tip. I soon realised that it's previous owner had restrung it incorrectly with the strings fitted in the wrong order, there is also a little damage to it but I figured for the price of a set of strings it was worth messing about with. Three days on and aside from the new strings taking a while to stretch its not a bad little thing to mess about with, and I have been trying a few of the easy classical pieces that I used to play. All very basic stuff ( probably aimed at primary school leve) but I am enjoying it!

And...it's finished!!!! The 'last few jobs' always turn out to be a 'myriad of final jobs. Anyway, all sorted. I'm passing it across to Alex tomorrow - I will try and get him to do a bit of recording at one of their band practices but, in the meantime, you'll have to trust me when I say it sounds great . Although it is just a small wiring change and no hardware change, I've opted NOT to go for the P-rails standard wiring system which gives: Full series humbucker; parallel humbucker; P90; Rails. I've used that system in a number of my own gigging guitars and I found that: - the fact that both pickups are always in the same configuration for the four options is actually, ironically, quite limiting. I was always hankering for, such as, 'neck pickup full series humbuck for the depth, mixed with bridge pickup in split coil mode to add a bit of extra treble and dispel any muddiness' and similar - I also never, in practice, used the rails by themselves...not enough ooomph - and I never, in practice, used the humbuckers in parallel...not enough depth I talked that through with Alex and, for kickoff, we decided to have a standard split coil option for both pickups where the operating coil in each case was the P90. So he can go full series humbucker with 3 way options, P90 with 3 way options and one (either) pickup P90 and the other series humbucker. It's a 30 minute job to change the wiring to the 'P-rail standard' options if he wants to try that in the future. Anyway, here are some of the arty-farty finished pics: Thanks again for watching this develop and your kind remarks along the way

i used one continuous oak board (easy cuts) to make this: lots of sanding, some stain, etc. I used the scraps to create supports for the bottom side (given the stomping): i used a 1 3/8" hole saw to cut an opening for wires. i then took that plug and split it in half to make posts, to wrap the excess wire: on the underside, i used wire ties, tacked into the wood, to secure the power lines: in the far corner above, you can see i velcroed the transformer onto the underside. then, velcro on the top, and on the pedals, and a $6 leather handle: then, rubber feet on the bottom, and wire it all together. PS this is not representative of my pedal setup, this is just for testing! i'll post the actual rig soon. it's made it through 6 gigs. hopefully more to come (we have about a dozen lined up!). what i'd change- it doesnt stand on it's side, probably because of how heavy pedals are. to put a stand plate on one side would mess with the aesthetic. what i'm thinking of adding- maybe a shoulder strap so i can make one trip from the car to the studio. i can send plans if anyone wants.

And she’s done! Strung with D’Addario 12-56. Just need to let the settle in and then add the dots to cover the bolts. It sounds lovely acoustic and plugged in.

Is that what's meant by 'air guitar'..?

Son(16) is a fan of King Gizzard and the Lizard Wizard. Cheap Squier Bullet Strat from Cash Converters and a Most-Marvelous Inter-Fret Job by @Andyjr1515 fella who sits (slumps!) at the bar in the BassChat Arms... (Blah! Blah! and Pics in a BassChat Tech&Repair post) https://www.basschat.co.uk/topic/496955-microtonal-fretting-microwhat-but-sorry-not-on-a-bass/?do=findComment&comment=5264843 When 12TET and 20 or so frets just arn't enough... go 24TET and over 40 frets to play with!

Just about finished my telecaster build from parts. Waiting on a jack plate one i bought was wrong size. I will no doubt fiddle with intonation feels sounds ok atm, neck relief is set at the heel so will play around and then make adjustments when i change strings. Bridge sitting high but action is low. Pickups are Custom shop Texas Special Switch gear and bots, pick guard from Axesrus Body and neck i bought from ebay Fender tuners, fender neck plate. Wd Bridge (pretty sure its WD) I chucked some Slinkys on it. Messing around with a bit of rhythm "sympathy for the devil" and i like it, twang and then some. Will see how it bends and stuff later.

Thanks everybody for your answers and contributions. Made some interesting reading, and some great model photos. Just before Christmas, I privately bought a Marshall amp. The owner asked if I would also take his old black and white Strat off his hands too for a meagre £30.... It was an exact double of the one in my original post with identical headstock and weight. Well...you can guess the rest! Cheers again for all of your input.

I think HB are great value guitars and worthy of modifying too...here is a Youtube video showing what I do to them:- Infinity Mirror Guitar v3 with hot rail pickup.

I've recently bought a HB PB50 bass. I rolled the fingerboard edges and gigged it last week. £105. unbelievable

And bringing it up to the present state of play... To balance the purple of the headstock and fretboard, I added a slice of purpleheart to a cut block of ebony and carved the beginnings of the bridge. I also cut the fretboard end to where it will meet the soundhole: Next, I turned my attention to the decoration around the soundhole. Although you have to be a bit canny to maintain the accuracy, I actually find the Dremel radius accessory reasonable for this job: I used a 1mm bit to cut a circle at the centre and wrapped some 1mm b/w/b purfling into it after running a teeny bead of glue onto the bottom edge. After scraping the excess purfling off, I drilled an offset radius tool spike-hole that will be used to put in a second, larger offsett ring (you can just see the pencil check marking offset and outside the installed ring): And then another radius tool spike-hole in between those two to be able to cut - using a 3mm bit - a mid radius to create an offset channel for some curved abelone that, all being well, would fit in between the two other rings. It worked!! And finally, the radius tool spike back to the original hole, but at a slightly smaller radius to now cut right through and create the sound hole : And that's how far I've got so far. It's dinky, isn't it!!!! : Next job is the bracing and 25 foot radiusing of the top. Other pesky distractions mean that it is likely to be into next week before I get to that - but when I do, I'll be sure to post the progress

And here it is!!! Set up is lovely, and it was practically in tune (I will have to get used to the locking tuners). Frets feel like a tiny polish on top needed, but playing in will deal with that. Neck is gorgeous, and I love the firemist colour. Either a very, very almost imperceptibly tiny ding on the headstock, or a miniscule imperfection on the headstock finish, but that's the sort of thing it'd get in a few days' use with me, so.... Overall, a stunning piece. The gig bag is surprising good, much higher quality than I expected, and the 25th logo inside it is a nice touch. Highly recommended. I still hope they do 5his soec in the CC colours going forward, as a DLX model.

@Richards Guitars... I am one of several Moderators of this fine Forum; this task has been very simple for several years past, as the folk here are a great bunch. We enjoy the occasional bout of banter (whilst remaining civil, naturally...) between friends that are used to each other's little ways and foibles; nothing wicked or hurtful. If there is any doubt as to any posts here, there is, top right of every post, three little dots (...), from where it's easy to create a Report. Every Report is brought automatically to the attention of the Mods and Admin, and what rare issues that do crop up are handled with serious and diplomacy. Feel free to avail yourself of this function at anytime (this goes for all that read this, naturally...). This site is an extension of Basschat.co.uk, which has been active for many decades now. Here, things tend to be a little slower-paced, but there is a healthy cross-over from one Forum to the other (many here are members of both...). This leisurely pace suits us fine, so don't be surprised if some replies to posts come only after a few days. I'm usually here sporadically several times each day, but then again : I'm retired, so... Glad to have you aboard; meanwhile... Have a wonderful day. Douglas

My loyalty sale HB DC Jnr. At £128, it cost less than I've seen tgem go for used.... I did wonder if QA might be a little more flexible at this reduced price, but the sole flaw I can find is that one of the screws on the back of the bridge is cery slightly angled. As with the MR Classic, the bridge feels a little cheap but perfectly functional; I'm not anticipating replacing it in the foreseeable. In the medium term, I want to add a totey guard for a Johnny Thunders vibe. I'm halfway tempted to switch the knobs for dice knobs as well. Overall, It's ridiculously impressive for the money. Great set uo out of the bix just needed tuning. Not a sniff of fretsprout or a sharp fret anywhere. This is what impresses me most at this sale price. Back when I started playing in 1991ish, the most basic, plywood Strat type cost more than this new (even without taking inflation into account), and wasn't always as good as this. I'd put it on a par with the Epiphone model. To really go a step up, I'd need to be looking at sonething like Maybach or a Gibson; the problem with those is that it always felt inherently 'wrong' to me to take what is by design a simple, budget instrument and inflate it to "luxury" level. The one thing that I'd like to see Thomann do better is to get the TV yellow colour right. I *might* have paid full rather than sale price over this one for that (throw in stainless steel fretsand it would be a given), but all other things being equal, if it was just the colour I wouldn't replace this one with another for that, which auggests it's not really that big a deal.... Thomann dodo a small range of "tribute" guitars, basically unofficial quasi sig models.... if the MR Classic is a great base for a Johnny Ramone tribute, this and the Fat version should surely provide a great option for a nod to both Johnny Thunders and Mick Jones circa 1976/77 especially. One thing I'm really impressed with, as on the MR, is the neatness of the finish around the headstock, where the black facing meets the colour on the rear.

I believe it's a First Act Delia. Reminds me a bit of a Hofner Verithin (sp?).

Well, on the final furlong. Basically, the finishing is finished and now just have to do the shielding, fretwork, electrics and final assembly/setup. The final stages of ebony sand-only and alder/maple Tru-oil slurry-and-buff is coming out nicely:

The quick answer is yes I am happy and have become even happier as my skills have developed. I guess in retrospect I should have asked more how would a more expensive guitar reflect in feel and my playing. I was lucky enough to come across a rather nice Epiphone Les Paul Studio electric guitar for what I have been advised is a reasonable price, there is not a mark on it. The same guitar tech that checked the acoustic changed the pick up switch for me and he is suitably impressed with my purchase. And bonus a work colleague gave me this little amp.

I spent some time this morning with the guitar strung up and on a strap for me to 'fit' the neck profile to suit Alex's style of playing. Basically, he played, I then scraped material off the neck haunches and then he tried it again. This was repeated over an hour until it 'felt right' for him. We can do further tweaks once it's finished and he can play it with amp/etc but it's probably close enough for me to start the final sanding, which I started this afternoon. As folks who have watched other builds will know, I often use some Tru-oil slurry and wiped to act as a grain filler and also as a reveal coat... to spot dints and lumps or sanding marks that are difficult to see on dry sanded wood. The good thing is that it also lets bot Alex and me see how the final colours and grain are going to turn out to be. I think it's going to be quite nice:

Well family stuff and domestic 'projects' largely clear and so I'm back to the build I'm not quite at the final furlong stage, but certainly getting closer to it. Next jobs were to finish the rough carving on the back and getting ready to sort the control chamber hatch. For the carve at the back, because it's curved, I am mainly using the larger of the two round-bottomed Ibex thumb planes and also the gooseneck card scraper: Don't let anyone tell you the Ibex planes are toys - they really are precision planes: Those curly shavings are rock maple and ebony! I used a bottom bearing rebate router bit to follow the chamber and mark the outer edge of the rebate - but the curve of the back makes it difficult to get an even depth of cut and so the rebate was cut to final depth using carpenters mallet and some sharp chisels. Done, ready to create the paper template and cut the hatch:

Couldn't resist doing a full mockup. In elapsed time (some pesky family commitments getting in the way ) this is probably around 4 weeks away from finish but, from the front view, it's getting pretty close. In the third pic, @Matt P, I also gave the top half a wipe with a damp cloth to show what the final colour will be. Seeing this, I'm certain tru-oil slurry and buff satin finish is the way to go :

So why are the body wings so deep? Well - because the body cross section is going to have some curves. Mind you, that will mean a LOT of carving - and I will creep up on the final shape and let the guitar show where it wants to go... Here comes in play one of my favourite hand-tools - the Veritas Pull-shave. I think it's designed for scooping out wooden chair seats, but it's ideal for this kind of job: But I also use the block plane, razor planes and cabinet scrapers. Off and on over a few days, it's starting to take shape. Carve here is probably 50% done for the body. In between carving sessions, I also added frets to the (still unglued) fretboard:

I cut the top ebony around the pencilled line of the fretboard end which allowed me to lay the fretboard on the angled neck and position the top. I drilled a couple of positioning holes in the middle of the pickup positions which, with the addition a couple of kebab sticks will stop the top from floating around as it's being clamped when the glue is applied: That meant I could check that the neck angle is going to be correct for the height of a standard tune-o-matic roller bridge: And so what about the end of the fretboard that is hanging in mid air? Well, of course the offcut from the neck blank when I cut the neck angle in the first place is going to be the correct angle. So I will be able to cut a short ramp from this (ignore the odd shaped headstock in the background - that's not connected with this project ) I will also be adding a demarcation stripe of maple between the alder and ebony: And so, with the kebab sticks positioning everything until the clamps were all on and then removed before the glue set, the clamps can now go on! :

This is going to be a through-neck and so the first thing to do is, generally, to sort the neck. 'Sort' means choose the timbers, assemble the laminates, incorporate the neck angle into the blank, calculate the headstock angle, calculate the body depth and the neck depth... ...but you can't calculate the neck depth until you know exactly what the fretboard thickness is. So, actually, that's where I started - by radiusing the ebony fretboard blank using the excellent G&W router jig: Then fifteen minutes sanding with a sanding block removes the router marks: So now I can do all the neck calcs and cut the maple/ebony/maple blank: The neck angle is around 3 degrees, starting from where the top body 'horn' meets the neck, and I generally opt for a 10 degree headstock angle.

Please accept my sincere and humble apologies! To make up for my schoolboy error, please accept 2 for the price of 1, the Epiphone and the Hohner acoustic I bought back in February. Now I am shopping for an amp, as per my post elsewhere on the forum.

I just picked up a BOSS ME-50 through Facebook marketplace for only £70, it’s a beauty . I’ve only just started to explore its capabilities but, so far I’m impressed. Like most things bought second-hand, it needed a good clean

Hi Douglas! I end up upgrading the pickup to the Kent Armstrong Handwound Body-Mounted PAF Jazz Humbucker Pickups and also changed the string to Thomastik-Infeld GB114 Jazz Guitar Strings: George Benson - Nickel Flatwound. Very happy with the result and thought to just share with you! Thanks for your response

Thought I’d add some full length photos and the headstock.

15 years after getting my Martin parlour, which is in the first post of this thread, and 3 years after saying in that post I’d get it restored, I finally did and just got it back The out of place full size bridge was replaced with the proper smaller pyramid style - it’s a bit scarred now because of that, but it is over 180 years old so I can live with that! To make it look less scarred would have compromised the original finish, rosette and vibe. It’s also got new tuners, cracks were fixed, and the back was French polished. Feel blessed to be a custodian of this one. Would love to know it’s stories.

So I got a chance to get this stung up and wow what a difference. It’s been really interesting hearing it before and after I drilled the holes in the well. Before it sounded a little muted or muffled and like it was being choked, or struggling, but now sounds a lot more open. I wouldn’t say it gave it more bass response, but certainly made it sound more controlled. It was also very heavy in the lower mids but the holes have created a little more clarity in the top end, so overall a lot more balanced.

Neck carving and finalising the transition on the heel. Going for the acoustic look but of course bolt on.

What a palava. OK so GC has been offline for a few days due to a mix-up in transfer of content from the old server (which was upgraded due to email notification issues on BC) to the new server. The old server subscription cancelled last week taking GC down with it. Then we had issues trying to get things set up on the new server. As you can see, we have managed to restore GC but the only back up on the old server was from January. Sorry sorry sorry sorry sorry to any of you who had made the effort to post detailed or lengthy replies during that time, I've personally lost at least one lengthy post as well. If you need to flame, go ahead. We had to unravel a whole load of secondary issues to do with databases not working quite right, upgrades not installing quite correctly, DNS and nameservers not being what they should be. However, thankfully, we have made it through the other side and GC is faster and more stable than ever. I don't expect this perfect storm to happen again and thanks in advance for your patience and understanding.

Hey all, I'm Shawn, 38 & fresh to the guitar. Yesterday was my very first day at getting stuck in (probably spent a little too long at it - finger tips feel like I burned them on a stove!). I spent my first hour awkwardly & awfully strumming between D & A chords, but hey, I'm excited for the months ahead. I intend to follow the tried, tested & trusted Justin Guitar lessons to see if I can get myself going. Looking back on this first video I can already see the importance of reallyyyyyy slowing every thing right down & it reinforces the need to let things naturally develop in its own time. Oh, and I need to get to grips with holding the pick properly. After just one hour I can highly recommend recording yourself practicing if you don't already! I noticed there's not a great deal of content around showcasing absolute beginners & it's clear to see why - seasoned amateurs & pros tend to sound a lot better! So, I decided to start this channel to not only periodically document my own progress from the very first day, but because I thought it may also be useful & intriguing for other beginners to watch both now & further down the line. A sort of way to truly realise that we're not alone all frustrated & wondering if things could ever possibly get better. Well, I'm going to find out if they do, anyway! If you fancy offering motivation, encouragement, tips, a chat etc. do feel free to follow along! https://youtu.be/zT9ij0RV4M4

What about selling it and buying a nice gift for the donor, or explain to him that you aren't getting on with it and ask if he would mind you selling it. You could offer him all or some of the money minus any expenses.

Its a stripped out Framus Capri 5/53 from the 1950s - There were a multitude of differing types,but yours just looks 'basic stripdown' ! https://www.framus-vintage.de/en/5-53-Capri/5-53.2-Capri/

I've found quite a bit of stuff for it in my various bits-boxes and rubbish bits-piles. Including - and I have NO idea why I have a set of these - some classical guitar tuners!: I found a mahogany offcut from one of my bass builds. Would the tuners fit? Wow - clearly this was meant to be : So, after cutting a headstock angle, out came my little Proxxon pillar drill: Back to the band saw to cut the rear face of the headstock, then back to the pillar drill and scroll saw to drill/saw the slots: Well - that went better than I thought it would!

I had the chance to check out a brand new new LP Standard during a course and the fretwork on it was shocking for a three grand instrument. Sire do a much, much better job.

Having played it a bit more since last post, I have to say this is a really fun guitar to play. It's not a shredding machine, and as a lead guitar it doesn't stand out as much. As a rhythm guitar though, it's f'n awesome! It sounds great with everything from a little crunch to hooked up with a high gain amp. I think it's actually the best guitar I own right now for playing fast metal riffs, every note played sounds clear and the riffs doesn't get mushy no matter how fast you play. It's got this twangy, almost percussive quality to it when played through a high gain amp, which can be fixed easily with a channel strip if you want a more conventional metal sound

Last weekend, my daughter asked to have a go on my guitar. She heard me play a single note that reminded her of something and asked me what "that song is? You know, the one that goes (hums tune I don't recognise)". Eventually, after a few more clues and using my dad psychic abilities, I realised she meant "Misirlou" by Dick Dale and the Deltones. SO I worked out the notes for it and she spent most of the weekend trying to play it. Now, she has never really played guitar before and had a strumming action similar to a stuck windmill sail, but she was enjoying it. She also had a go at Master of Puppets and a bit of Nirvana. Then when I was out of the room I heard a couple of recognisable tunes and realised that she was looking at one of my books and was having a go at "Sex on Fire" and "Cigarettes and Alcohol". I was impressed that she was having a go and even managed to produce something recognisable, so I've decided to get her an electric guitar of her own. I've ordered a Mooer Hornet modelling amp (£105 from Thomann) and today went down to the local guitar shop to look at one of the new Squier Sonic series Telecasters (I considered a TE-62DB from Harley Benton, but wanted to get a guitar from a shop that would be set up already, without having to worry that I might have to return it or pay for a setup). I went in and asked to try the black model. The guy got a cable, got the guitar, plugged it in and left me to it. I played for a bit and then started to examine the guitar and that's when I noticed a lump out of the finish where my arm was resting. I had a notion that they only had one black one in stock. I pointed the chip out to the guys in the shop and they were gutted, not at me obviously. The guy I'd been dealing with even said that he wouldn't have minded if someone had done it and said to them. To damage the instrument and hang it up again before walking away is just a really sh***y thing to do. Anyway, they've ordered a new one for me and it should be here within the week.

New kid on the block

After months of holding out in hope Thomann would come round and do their MR Classic Mosritealike in a solid colour, I happened to notice today they've dropped the price on the existing model to £165. Today being payday, I jumped on paypal in three and.... I'm having it delivered to the office til I can convincingly say "bigger boys made me do it"... Off on a work trip Friday, so I won't see it til earliest 5 June, but excited. All the MR Classics are markedly cheaper than they were; I hope this is them making way for new stock rather than cancelling the model. Still hoping they do a white one patterned after the Johnny Ramone Ventures II... and the blue and red ones lefty.... at this price, if I get on well with the first, I would buy one of each of those.

The little amp has arrived. I opened it just to check that it works and had a very quick play through it. It's very light, but the knobs, buttons and switches all feel fine. It sounds great. I played through the a few of the presets they all sound superb. There's a built in tuner, which will be useful for my daughter. It's all boxed up again until her birthday.

Cutting the pickup chambers meant that I could do a mockup to talk to Alex what his preference for the position of the controls is before I cut the control chamber: And then the control chamber could be cut and the carve continued at the back - this time switching to the trusty gooseneck card scraper: Next was fitting the trussrod, cap and gluing the fretboard after laminating it with a maple and a black veneer to give me a demarcation line: Starting to get there: Time to start the neck carve and then blend that in with the continuing body carve.

With the neck blank done, I could start trial-fitting the wings and top. I joined the book-matched ebony top and cut out the broad shape. I also cut the alder back wings slightly oversize and a couple more strips of ebony between them and the neck and dry fitted them to make sure everything was going to end up in the right place: The ebony will have a sheet of constructional maple veneer (1.5mm) as a demarcation: All good so out came the sash-clamps: The neck is the top face of the original billet and the length between the top wing front join to the tail is angled the 3 degrees to give me the required neck angle. Double check that I've got it right before the next stage:

Folks over on Basschat have often asked why I don't post on Guitarchat, even when my builds are 6-string guitar builds. Well, up until now, Guitarchat has always been blocked by Norton on my system, with warnings of dire consequences, social unrest, pestilence and a return of Dynasty to our television screens if I were to commit such a dastardly act as to ignore their warnings. And, having had problems for years with ID fraud (it's what happens when you get your briefcase stolen from under your feet in Belgium) my banks are quite touchy about me not taking action and disregarding 'reasonable warnings of unsafe websites'. Anyway - looks like the mods have done some mods (that said, I think - and have always thought - this was a Norton quirk, not a Guitarchat quirk) because, for the first time I am able to log on without the warnings and for which I am very grateful. I am going to celebrate by boring you all silly with a guitar build thread that I'm currently on with. Don't say you haven't been warned! Andy

That looks amazing. Disappointed by the lack of gingham scratchplate though...

In the end, I found this locally:- Played through headphones, it should keep her indoors happy..................... and me too! Budget? What budget was that then!

Quick update after I had an hour to pop in to a guitar shop. I tried a few things but the one that clicked for me was a Reverend club king 290. Although it's a 25.5 inch scale it didn't feel a stretch. It balances as well as my jag. It's semi hollow but feels more chambered than other semis. The tones were amazing though. Really responsive to touch, and the bass cut and tone knobs give lots of scope for changing sounds. Anyway, I'll have my eye out for one of these. If I can flog something off I might even trat myself to a new one.

What Dad said. To add a little more… There are some incredible guitars at very reasonable prices these days and it’s hard to buy a real ‘lemon’. A Squier Tele should come set up pretty well from the factory (or order from a shop that offers a setup service if you really feel the need). Certainly, it will be set up well enough to see you through the initial phase of learning the instrument. For versatility I think a Tele is hard to beat and all of the big online retailers have good returns policies - just keep the packaging and leave the plastic film on the pickups until you know you’re keeping it. Happy hunting!