Late Bloomer Posted September 25, 2020 Share Posted September 25, 2020 Hi all hope you can help. Tearing my hair out. Bought a behringer uphoria UM2 as my first audio interface. Plugged it into my windows pc and and a driver called usb audio codec appears. Sound from the pc is going into it fine. I set up the free version of Guitar Rig 5 as the amp sim but when i plug my guitar into the interface, nothing happens. When I look at the inputs in the audio section of Guitar Rig they are all showing as NOT CONNECTED. Spend a while online looking for troubleshooting guides but cant find a thing. Any advice welcome. Have I done something stupid? The installation instructions that came with the interface mentioned the need to download the latest usb driver but when I went to the website it was sending me to an external link. Also a behringer quickstart video on youtube says that there is no need to download anything. It should just plug and play Quote Link to comment Share on other sites More sharing options...
Late Bloomer Posted October 1, 2020 Author Share Posted October 1, 2020 Hi all, I have still not managed to sort this issue out. I have attached a short video showing how I am set up. Would be great if somebody could have a look and see if there is anything obvious to you. IMG_0018.MOV Quote Link to comment Share on other sites More sharing options...
ezbass Posted October 1, 2020 Share Posted October 1, 2020 Beats me. I don’t how the Behringer works, but I’d have thought there’d be some sort of level indicator so you can set the gain. Therefore, I’d suggest that the fault lies either with the guitar, lead or interface input, but I could be way off base. Quote Link to comment Share on other sites More sharing options...
Late Bloomer Posted October 1, 2020 Author Share Posted October 1, 2020 Thanks for looking. Guitar and lead are working fine as I use them in an amp all the time. Beginning to think the interface input is faulty. The output works fine on it. Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted October 1, 2020 Share Posted October 1, 2020 (edited) On 25/09/2020 at 20:19, Late Bloomer said: Hi all hope you can help... Let's try a 'step-by-step' approach. Have you seen this..? UM2 Set-up video ... It shows how to acquire and install the drivers. That'll be the first step... Edited October 1, 2020 by Dad3353 Quote Link to comment Share on other sites More sharing options...
Late Bloomer Posted October 1, 2020 Author Share Posted October 1, 2020 Thanks again. I have installed the Asioforall driver and looked at every video I could find. The actual Behringer UM2 video suggest no drivers are required though and I cant find any instructions on what to do with Asioforall after downloading it Quote Link to comment Share on other sites More sharing options...
Late Bloomer Posted October 1, 2020 Author Share Posted October 1, 2020 Hi again just to add that the same problem occurs when I connect the interface to my IPad. Output sound from IPad to headphones in the interface is working fine but no signal when guitar plugged in. YouTube videos mention that the UM2 is class compliant and will work fine into Garage Band etc. Thanks for your help on this everyone Quote Link to comment Share on other sites More sharing options...
ezbass Posted October 1, 2020 Share Posted October 1, 2020 (edited) Have you tried the combination input on the left, Mic/Line1? Edited October 1, 2020 by ezbass Quote Link to comment Share on other sites More sharing options...
ezbass Posted October 1, 2020 Share Posted October 1, 2020 Ooh, have you seen this? https://www.reddit.com/r/audio/comments/50l4s1/help_how_do_you_get_your_behringer_uphoria_um2_to/d9df868/ Quote Link to comment Share on other sites More sharing options...
Late Bloomer Posted October 1, 2020 Author Share Posted October 1, 2020 Thanks and yes have tried both inputs and also read that. Nothing doing! Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted October 1, 2020 Share Posted October 1, 2020 Is it a Mac you're using..? If so, have you seen this..? UMC set-up for Mac ... You won't need USB drivers for Mac. Just plug in the UMC, then follow the Mac process (starts at 2:32 in the video...). Any use..? Quote Link to comment Share on other sites More sharing options...
Late Bloomer Posted October 1, 2020 Author Share Posted October 1, 2020 Hi and thanks for your help. I have a windows 10 laptop with guitar rig and an IPad with Garage band. No joy on either. Same problem. Output works but no input signal Quote Link to comment Share on other sites More sharing options...
Late Bloomer Posted October 13, 2020 Author Share Posted October 13, 2020 Hi all. Well I finally got sorted. Thanks for your help. I reinstalled the USB driver and configured it properly. Having great fun playing and (to me anyway) sounding like Andy Summers and Jimi Hendrix with some of the presets. I have a new question now. Is there a way I can play along to backing tracks on spotify/youtube through the headphones connected to the interface? At the moment only the Guitar is coming through and the sound from backing tracks is coming out of the PC. Quote Link to comment Share on other sites More sharing options...