owen

https://www.gak.co.uk/en/squier-fsr-classic-vibe-60s-telecaster-thinline-gold-anodized-pickguard-sonic-blue/958317

It is a Tele I bolted together using new parts from various places. I then saw a Fernandes Sustainer guitar being sold cheap. I bought it, paid someone to gut the pickup and controls and then plumb then into this. Sadly it looks as if he did it out of phase but being that I am not a guitarist and had no reference points I have only just clocked it. 

Lots of fun, but probably complicating matters.

I cannot get the front plate off. So I opened the back. I perhaps should have mentioned that I have an Fernandes Sustainer pickup in there. I think I will take it to a grown up. 

7 hours ago, ezbass said:

Just swap the hot and earth leads over on one of the pickups, all sorted.

You make it sound so easy. Will the internet give me pictures? I would go and look, but would not know what I was looking for. I can borrow a decent soldering iron from work. How hard can it be? Super famous last words. 

I checked my Tele by playing one which I knew to be correctly wired. Night and day difference.

Interestingly, I went back to my Telecaster this morning which is where this started for me. My Tele has a sustainer humbucker in the neck and a standard Catswhisker T birdge pickup. I had played my Tele and then the Ricker-thang a few days ago which is what started this quest. It turns out that my Tele is all sorts of out of phase. So the neck pickup on my Ricker-thang is not actually full of magic, it is just actually wired correctly

Because I am not a guitarist I am not attuned to what "should" be happening. Every day is a school day.

As usual, thanks for humouring me.

And my chances of getting my hands on a real 360 are somewhere between zero and zero. 

Thanks for the response. Sorry, I should have clarified. It is a much respected UK luthier who specialises in Rick-alikes. He has loaded it with Retrovibe Toaster pickups so I am presuming it is at the very least in the Rick ballpark. 

I have recently surprised myself by buying a Rick-alike 360 Capri in light blue. I am a sucker for the aesthetics, but ultimately I do not think it is for me. However I LOVE the neck pickup on it. I understand that there are lots of other parts to the equation of THE TOOONE!!!1!!, but quite fancy whacking one into something else. What is it about them which makes them them? Is it just a bog standard pickup in a fancy case or is it something Rick exclusive?

Here is a picture cos I know what we are all like. 

I put some nicer humbuckers in this. Were they DiMarzio's? Possibly I just cannot remember.

Anyway, £150 + shipping to your door. It is a bit dented but plays nicely. It needs new strings.

Thanks Magister. Very interesting. It is not mine to do anything with, but will feed back to the student who's grandfather owned it. 

Thanks Douglas. The blindingly obvious lack of truss rod should have told me all I needed. But it is good to check these things. There will certainly be no spending on it!

A student bought this in asking us to help him restring it. It is clearly going to need more that a new set off strings. Re-setting the neck is only the beginning! I am not expectingn it to be 1901 Martin, but was wondering what is actually is. Any ideas? Does the F stand for Framus?

Thanks. This https://www.coda-music.com/swart-night-light-junior-attenuator.html  looks like it might fit the bill. We are so used to needing bucketloads of power in bass rigs for headroom that we forget that guitar amps are a whole different game. A 1 watt amp would have been WAY better.

Hi all,

We have a Fender Pro Junior iv at work. We bought it to use as a recording amp. However, to get it to sing it is still mind bendingly loud in an enclosed space. Any thoughts on how to tame it?

TIA

Thanks both. Given my appaling track record of bodging things or just not completing, probably picking up a 2nd hand PRS would be the obvious option. But now I know!

I picked up one of the cheap as chips Donner 3 FX in a box things. It did the job really nicely.

I have a Fender Maurader reissue which I really like. It has a tremolo bridge which is ....... not great - but standard Fender size and fittings etc.  I just played a student's PRS SE jobbie. The tremolo on that was really nice and fluid. Can anyone suggest a retrofit bridge which would get me moving in the right direction? Bass hardware, I could bore for Wales about it. Guitar stuff is something I have never taken a huge interest in. Maybe it is just a matter of setting it up properly.

TIA

I was thinking of 3 identical units in different practice rooms so that there was consitency.

Going to individual stomp boxes (3 sets of them) would give a more direct plug and play thang, but the massively enhanced flexibility of multi FX does win the day.

You do lose the functionality of that one foot movment = magic new tones.

Thanks Dad, both those look interesting. This process is helping me think through things. For real stomp box functionality, I guess a row of 4 Behringer pedals would be super easy to deal with.

I am now answering myself so that I can click on the follow topic function.

I teach in a college and need 2 or 3 easy to use multi FX units. I need stomp box functionality and ease of use. These students do not have the time to spend an hour programming them. I will have clean, grit and dirt programmed into 3 pedals. I am thinking Boss GT 1. Any other options which might be cheaper still but have that functionality? The Valeton stuff looks like it might do it, but perhaps the Boss brings more to the table.

TIA